鋁單板幕墻板因為其加工性能良好、造型和外觀色彩多變、不易沾污，便于清潔和保養等優點，不僅可以應用于室外裝飾還可以應用于室內墻面、天花吊頂、隔墻、包柱、包梁、陽臺、門套、窗 臺、柜臺、廣告牌，甚至屏風以及工藝品等裝飾。單層鋁單板幕墻板的結構主要由面板、加強筋、掛耳等部件組成。加工好的氟碳涂層板材01構造 由上至下依次為：保護膜層、氟碳樹脂PVDF系統（三涂時由上至下分別為光漆、面漆、底漆）、預處理層、鋁板層、預處理層、背覆涂層（雙面噴涂）。根據客 戶要求，鋁板背面可添加礦棉、巖棉增強保溫、隔熱和隔音等效果。
Because of its good processing performance, changeable shape and appearance color, not easy to contaminate, easy to clean and maintain and other advantages, aluminum veneer curtain wall panel can not only be applied to outdoor decoration, but also to interior wall, ceiling, partition wall, column, balcony, door cover, windowsill, counter, billboard, even screen and handicraft decoration. The structure of single-layer aluminum veneer curtain wall panel is mainly composed of panel, stiffener, hanger and other components. The structure of the processed fluorocarbon coated plate 01 from top to bottom is as follows: protective film layer, fluorocarbon resin PVDF system (from top to bottom when three coats are light paint, top coat and primer), pretreatment layer, aluminum plate layer, pretreatment layer and back coat (double-sided spraying). According to customers' requirements, mineral wool and rock wool can be added on the back of aluminum plate to enhance the effect of heat preservation, heat insulation and sound insulation.